
Adhesives, primers and notched trowels for full-surface bonding of parquet, floorboards and vinyl.
68 products
A floor that is fully bonded to the subfloor lies firmly, sounds muffled underfoot and works well with underfloor heating. Which adhesive is right depends on the floor covering and the subfloor: parquet and floorboards are usually bonded with shear-elastic SMP adhesives (silane-modified polymers) or two-component PU adhesives. Glue-down vinyl and design floor coverings are installed with a dispersion adhesive for design floor coverings.
Before bonding, the subfloor must be dry, level, clean and load-bearing. Absorbent or sanding screeds need a suitable primer, depending on the adhesive. The notch size of the trowel determines how much adhesive is applied – it is stated in the technical data sheet of each adhesive, as are the open time and the waiting time before the floor can be walked on.
Besides parquet and vinyl adhesives, you will find white wood glue for tongue and groove, adhesive for skirting boards and special adhesives, for example for yacht decking. If you are unsure which adhesive suits your floor, we will be happy to advise you.
Fully bonded parquet and floorboards are usually installed with shear-elastic SMP adhesives or 2K PU adhesives. What matters are the parquet manufacturer's instructions and the subfloor.
Glue-down vinyl and design floor coverings are installed with a dispersion adhesive for design floor coverings. Click vinyl, on the other hand, is floated and does not need adhesive.
That depends on the adhesive, the notch size of the trowel and the subfloor. The consumption is stated in the technical data sheet of each adhesive.